{"title":"8mm Push Rivets","description":"\u003cp\u003eAll of our push rivets are sized for an 8 mm (about 5\/16\") panel hole, so this page is the quickest way to see every style in one place: general-purpose 8 mm nylon fender clips, versions laid out by vehicle make, and clips for car fender liners, snowmobile hoods, dirt-bike plates, jet-ski panels and enclosed trailers. Each comes as a single rivet or in packs up to 1,000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to check that 8 mm is right.\u003c\/strong\u003e Pull one old rivet and measure the hole, not the rivet: an 8 mm drill bit or a 5\/16\" bit should slide through with little play. If the hole is clearly smaller (6-7 mm) or larger (9-10 mm), an 8 mm rivet will be loose or will not go in. Also check the total thickness of the panels you are joining; the rivet body needs to pass through both before the center pin spreads the legs. To remove an old rivet, pry up the center pin first, then lift the body out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShop by vehicle:\u003c\/strong\u003e \u003ca href=\"\/collections\/polaris-push-rivets-fender-clips\"\u003ePolaris\u003c\/a\u003e · \u003ca href=\"\/collections\/can-am-push-rivets-fender-clips\"\u003eCan-Am\u003c\/a\u003e · \u003ca href=\"\/collections\/honda-push-rivets-fender-clips\"\u003eHonda\u003c\/a\u003e · \u003ca href=\"\/collections\/yamaha-push-rivets-fender-clips\"\u003eYamaha\u003c\/a\u003e · \u003ca href=\"\/collections\/automotive-push-rivets-fender-liner-clips\"\u003eCars \u0026amp; trucks\u003c\/a\u003e · \u003ca href=\"\/collections\/snowmobile-push-rivets-hood-clips\"\u003eSnowmobile\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"8mm-push-rivets-nylon-fender-clips-for-atv-utv-100-1000-packs","title":"8mm Push Rivets for ATV \u0026 UTV – Black Nylon Fender Clips, 15mm Head, 21mm Long (Single to 1000-Pack)","description":"\u003cp\u003e\u003cstrong\u003eUniversal 8mm nylon push rivets\u003c\/strong\u003e — the most common plastic body fastener on ATVs, UTVs, and side-by-sides. Push-in expansion clip secures fenders, side panels, footwells, and airbox covers into any 8mm hole.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShank diameter: 8mm (fits 8mm \/ 5\/16\" holes)\u003c\/li\u003e\n\u003cli\u003eHead diameter: 15mm\u003c\/li\u003e\n\u003cli\u003eOverall length: 21mm\u003c\/li\u003e\n\u003cli\u003eMaterial: black nylon (UV and impact resistant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces OEM Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHonda 90653-HC4-900\u003c\/li\u003e\n\u003cli\u003ePolaris 7661855\u003c\/li\u003e\n\u003cli\u003eCan-Am \/ BRP 293150089\u003c\/li\u003e\n\u003cli\u003eArctic Cat 8413-100\u003c\/li\u003e\n\u003cli\u003eKawasaki 92039-0033\u003c\/li\u003e\n\u003cli\u003eSuzuki 09409-08308\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits Thousands of Models Including\u003c\/h3\u003e\n\u003cp\u003ePolaris Sportsman, Scrambler, RZR, Ranger, General • Honda TRX Rancher, Foreman, Rubicon, Rincon, Pioneer, Talon • Can-Am Outlander, Renegade, Commander, Maverick, Defender • Yamaha Grizzly, Kodiak, Raptor, Rhino, Viking, Wolverine • Kawasaki Brute Force, KFX, Mule, Teryx • Suzuki KingQuad, Ozark • Arctic Cat ATVs, Wildcat, Prowler • plus snowmobile hoods, dirt bike fenders, and any 8mm panel hole.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNot sure it fits? Check your fender clip hole — if it measures 8mm (5\/16\"), this is your rivet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639407108143,"sku":"PRW-8MM-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639407140911,"sku":"PRW-8MM-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639407173679,"sku":"PRW-8MM-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639407206447,"sku":"PRW-8MM-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639407239215,"sku":"PRW-8MM-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639409074223,"sku":"PRW-8MM-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_6b89e7ed-f571-45b3-a500-ac9331a11759.jpg?v=1784498859"},{"product_id":"polaris-7661855-replacement-push-rivets-8mm-fender-clips","title":"Polaris 7661855 Replacement Push Rivets – 8mm Black Nylon Fender Clips, 15mm Head, 21mm Long","description":"\u003cp\u003eAftermarket replacement for \u003cstrong\u003ePolaris OEM part 7661855\u003c\/strong\u003e — the 8mm nylon push rivet used across the Polaris lineup. Same 8mm shank, 15mm head, 21mm length as the factory clip, at a fraction of dealership price.\u003c\/p\u003e\u003ch3\u003eUsed on\u003c\/h3\u003e\u003cp\u003eSportsman 400\/450\/500\/550\/570\/700\/800\/850\/XP 1000 • Scrambler 500\/850\/XP 1000 • RZR 570\/800\/900\/XP 1000\/XP Turbo • Ranger 500\/570\/900\/XP 1000 • General 1000 • ACE — securing fenders, side panels, footwells, doors, and bed panels.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003cli\u003eDirect 7661855 replacement — not reusable, always install fresh\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs. A full plastic refresh typically uses 30–40 rivets.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639418118191,"sku":"PRW-8MM-POL-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639418150959,"sku":"PRW-8MM-POL-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639418183727,"sku":"PRW-8MM-POL-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639418216495,"sku":"PRW-8MM-POL-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639418249263,"sku":"PRW-8MM-POL-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639418085423,"sku":"PRW-8MM-POL-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_62724a13-aa68-4c1a-8e19-ccee95e364c5.jpg?v=1784498860"},{"product_id":"honda-90653-hc4-900-replacement-push-rivets-8mm-fender-clips","title":"Honda 90653-HC4-900 Replacement Push Rivets – 8mm Black Nylon Fender Clips, 15mm Head, 21mm Long","description":"\u003cp\u003eAftermarket replacement for \u003cstrong\u003eHonda OEM part 90653-HC4-900\u003c\/strong\u003e — the 8mm nylon trim clip Honda has used on ATVs and side-by-sides for decades. Identical 8mm shank, 15mm head, 21mm length.\u003c\/p\u003e\u003ch3\u003eUsed on\u003c\/h3\u003e\u003cp\u003eTRX250 Recon • TRX300 FourTrax • TRX350\/400\/420 Rancher • TRX450\/500 Foreman • TRX500 Rubicon • TRX650\/680 Rincon • Pioneer 500\/700\/1000 • Talon 1000 — securing fenders, side covers, and footwell panels.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003cli\u003eDirect 90653-HC4-900 replacement — always install fresh after removal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639418314799,"sku":"PRW-8MM-HON-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639418347567,"sku":"PRW-8MM-HON-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639418380335,"sku":"PRW-8MM-HON-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639418413103,"sku":"PRW-8MM-HON-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639418445871,"sku":"PRW-8MM-HON-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639418282031,"sku":"PRW-8MM-HON-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_1dce28ad-4674-44cb-8d8c-ead73b38d62c.jpg?v=1784498860"},{"product_id":"can-am-293150089-replacement-push-rivets-8mm-body-panel-clips","title":"Can-Am 293150089 Replacement Push Rivets – 8mm Black Nylon Body Panel Clips, 15mm Head, 21mm Long","description":"\u003cp\u003eAftermarket replacement for \u003cstrong\u003eCan-Am \/ BRP OEM part 293150089\u003c\/strong\u003e — the 8mm nylon push rivet found throughout the Can-Am lineup. Same 8mm shank, 15mm head, 21mm length as the factory fastener.\u003c\/p\u003e\u003ch3\u003eUsed on\u003c\/h3\u003e\u003cp\u003eOutlander 400\/450\/500\/570\/650\/800\/850\/1000 • Renegade 570\/850\/1000 • Commander 800\/1000 • Maverick 1000\/X3 • Defender HD8\/HD10 • DS — securing fenders, side panels, doors, bed panels, and dash trim.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003cli\u003eDirect 293150089 replacement — always install fresh after removal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639418511407,"sku":"PRW-8MM-CAM-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639418544175,"sku":"PRW-8MM-CAM-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639418576943,"sku":"PRW-8MM-CAM-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639418609711,"sku":"PRW-8MM-CAM-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639418642479,"sku":"PRW-8MM-CAM-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639418478639,"sku":"PRW-8MM-CAM-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_8c4dbfa5-64f2-46cd-946c-c5c5fc5ab1e6.jpg?v=1784498860"},{"product_id":"kawasaki-92039-0033-replacement-push-rivets-8mm-trim-clips","title":"Kawasaki 92039-0033 Replacement Push Rivets – 8mm Black Nylon Trim Clips, 15mm Head, 21mm Long","description":"\u003cp\u003eAftermarket replacement for \u003cstrong\u003eKawasaki OEM part 92039-0033\u003c\/strong\u003e — the 8mm nylon rivet used on Kawasaki ATVs and side-by-sides. Same 8mm shank, 15mm head, 21mm length.\u003c\/p\u003e\u003ch3\u003eUsed on\u003c\/h3\u003e\u003cp\u003eBrute Force 300\/650\/750 • KFX450R • Mule Pro-FX\/Pro-FXT • Teryx 750\/800 • Teryx KRX 1000 — securing fenders, side covers, footwells, doors, and bed panels.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003cli\u003eDirect 92039-0033 replacement — always install fresh after removal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639418708015,"sku":"PRW-8MM-KAW-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639418740783,"sku":"PRW-8MM-KAW-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639418773551,"sku":"PRW-8MM-KAW-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639418806319,"sku":"PRW-8MM-KAW-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639418839087,"sku":"PRW-8MM-KAW-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639418675247,"sku":"PRW-8MM-KAW-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_f2c60e29-c715-4609-bd73-00c3bd61efa9.jpg?v=1784498860"},{"product_id":"suzuki-09409-08308-replacement-push-rivets-8mm-fender-clips","title":"Suzuki 09409-08308 Replacement Push Rivets – 8mm Black Nylon Fender Clips, 15mm Head, 21mm Long","description":"\u003cp\u003eAftermarket replacement for \u003cstrong\u003eSuzuki OEM part 09409-08308\u003c\/strong\u003e — the 8mm nylon push rivet used on Suzuki ATVs. Same 8mm shank, 15mm head, 21mm length as the factory clip.\u003c\/p\u003e\u003ch3\u003eUsed on\u003c\/h3\u003e\u003cp\u003eKingQuad 400\/450\/500\/700\/750 • Ozark 250 • LT-Z400 QuadSport — securing fenders, side covers, and body panels.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003cli\u003eDirect 09409-08308 replacement — always install fresh after removal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639418904623,"sku":"PRW-8MM-SUZ-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639418937391,"sku":"PRW-8MM-SUZ-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639418970159,"sku":"PRW-8MM-SUZ-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639419002927,"sku":"PRW-8MM-SUZ-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639419035695,"sku":"PRW-8MM-SUZ-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639418871855,"sku":"PRW-8MM-SUZ-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_30b49d81-a566-4152-9337-f791e78c5800.jpg?v=1784498860"},{"product_id":"arctic-cat-8413-100-replacement-push-rivets-8mm-panel-clips","title":"Arctic Cat 8413-100 Replacement Push Rivets – 8mm Black Nylon Panel Clips, 15mm Head, 21mm Long","description":"\u003cp\u003eAftermarket replacement for \u003cstrong\u003eArctic Cat OEM part 8413-100\u003c\/strong\u003e — the 8mm nylon push rivet used on Arctic Cat ATVs, side-by-sides, and snowmobiles. Same 8mm shank, 15mm head, 21mm length.\u003c\/p\u003e\u003ch3\u003eUsed on\u003c\/h3\u003e\u003cp\u003eAlterra 450\/570\/700 • Wildcat 1000 \/ Wildcat Trail • Prowler 700 • plus Arctic Cat snowmobile hoods and side panels — securing fenders, body panels, and trim.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003cli\u003eDirect 8413-100 replacement — always install fresh after removal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639419101231,"sku":"PRW-8MM-ARC-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639419133999,"sku":"PRW-8MM-ARC-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639419166767,"sku":"PRW-8MM-ARC-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639419199535,"sku":"PRW-8MM-ARC-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639419232303,"sku":"PRW-8MM-ARC-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639419068463,"sku":"PRW-8MM-ARC-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_f5600063-d6b3-41bc-889f-100ac597cdd3.jpg?v=1784498860"},{"product_id":"yamaha-atv-push-rivets-8mm-fender-panel-clips-90269-06025-style","title":"Yamaha ATV Push Rivets (90269-06025 Style) – 8mm Black Nylon Fender \u0026 Panel Clips, 15mm Head, 21mm Long","description":"\u003cp\u003eEquivalent-style replacement for \u003cstrong\u003eYamaha 90269-06025\u003c\/strong\u003e class 8mm push rivets used across Yamaha ATVs and side-by-sides. 8mm shank, 15mm head, 21mm length — fits Yamaha's 8mm fender and panel holes.\u003c\/p\u003e\u003ch3\u003eUsed on\u003c\/h3\u003e\u003cp\u003eGrizzly 350\/450\/550\/660\/700 • Kodiak 450\/700 • Raptor 700 • YFZ450 • Rhino 450\/660\/700 • Viking 700 • Wolverine X2\/X4 — securing fenders, side panels, and footwells.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003cli\u003eFits any 8mm (5\/16\") panel hole — verify your hole size before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639422017583,"sku":"PRW-8MM-YAM-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639422050351,"sku":"PRW-8MM-YAM-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639422083119,"sku":"PRW-8MM-YAM-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639422115887,"sku":"PRW-8MM-YAM-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639422148655,"sku":"PRW-8MM-YAM-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639421984815,"sku":"PRW-8MM-YAM-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_d4d6a428-ed0e-4c2f-848e-09b213cb2748.jpg?v=1784498861"},{"product_id":"8mm-automotive-fender-liner-bumper-clips-nylon-push-rivets","title":"8mm Automotive Fender Liner \u0026 Bumper Clips – Nylon Push Rivets","description":"\u003cp\u003e\u003cstrong\u003e8mm nylon push rivets for automotive fender liners, splash shields, and bumper covers.\u003c\/strong\u003e The universal expansion-rivet style used where the panel hole measures 8mm (5\/16\").\u003c\/p\u003e\u003ch3\u003eCommon applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInner fender liners and wheel well splash shields\u003c\/li\u003e\n\u003cli\u003eBumper cover edges and lower valances\u003c\/li\u003e\n\u003cli\u003eEngine splash guards and underbody panels\u003c\/li\u003e\n\u003cli\u003eTrunk and cargo area trim panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant — measure first\u003c\/h3\u003e\u003cp\u003eAutomotive clip sizes vary by make, model, and even panel position. \u003cstrong\u003eThese fit 8mm holes with panel stack-up of roughly 2–6mm.\u003c\/strong\u003e Pop out one old clip and measure the hole (a 5\/16\" drill bit that just slips through confirms 8mm). If your hole is 9mm or 10mm, these are not your clip.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall length\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs — shops, keep a 1000 pack on the shelf.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639422214191,"sku":"PRW-8MM-AUTO-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639422246959,"sku":"PRW-8MM-AUTO-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639422279727,"sku":"PRW-8MM-AUTO-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639422312495,"sku":"PRW-8MM-AUTO-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639422345263,"sku":"PRW-8MM-AUTO-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639422181423,"sku":"PRW-8MM-AUTO-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_651ca540-36ac-401d-85a7-da520334a4cd.jpg?v=1784498860"},{"product_id":"snowmobile-hood-panel-push-rivets-8mm-nylon-clips","title":"Snowmobile Hood \u0026 Panel Push Rivets – 8mm Nylon Clips","description":"\u003cp\u003e\u003cstrong\u003e8mm push rivets for snowmobile hoods, side panels, and belly pans.\u003c\/strong\u003e The expansion-clip style used across Ski-Doo, Polaris, Arctic Cat, and Yamaha sleds wherever the panel hole measures 8mm.\u003c\/p\u003e\u003ch3\u003eCommon applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHood and side panel attachment points\u003c\/li\u003e\n\u003cli\u003eBelly pan and skid plate edges\u003c\/li\u003e\n\u003cli\u003eWindshield trim and console panels\u003c\/li\u003e\n\u003cli\u003eReplaces Arctic Cat 8413-100 \/ 1470-105 class fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCold-weather note\u003c\/h3\u003e\u003cp\u003eNylon stays flexible well below freezing — these won't shatter like brittle old factory clips during trailside panel removal. Always install fresh rivets; removal deforms the legs.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall — fits 8mm (5\/16\") holes\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639422410799,"sku":"PRW-8MM-SNOW-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639422443567,"sku":"PRW-8MM-SNOW-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639422476335,"sku":"PRW-8MM-SNOW-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639422509103,"sku":"PRW-8MM-SNOW-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639422541871,"sku":"PRW-8MM-SNOW-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639422378031,"sku":"PRW-8MM-SNOW-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_5e8d248c-a418-4601-b215-f78a0cedc2bb.jpg?v=1784498861"},{"product_id":"dirt-bike-plastic-push-rivets-8mm-panel-number-plate-clips","title":"Dirt Bike Plastic Push Rivets – 8mm Panel \u0026 Number Plate Clips","description":"\u003cp\u003e\u003cstrong\u003e8mm push rivets for dirt bike plastics\u003c\/strong\u003e — number plates, airbox covers, fork guards, and fender extensions that mount into 8mm holes.\u003c\/p\u003e\u003ch3\u003eCommon applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSide number plates and airbox side covers\u003c\/li\u003e\n\u003cli\u003eRear fender extensions and mud flaps\u003c\/li\u003e\n\u003cli\u003eFork guard and radiator shroud secondary mounts\u003c\/li\u003e\n\u003cli\u003eSkid plate and chain guide trim points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNote on dirt bike plastics\u003c\/h3\u003e\u003cp\u003eMost primary dirt bike body panels bolt on — push rivets appear at secondary attachment points, which vary by brand and year. \u003cstrong\u003eMeasure your hole:\u003c\/strong\u003e if it's 8mm (5\/16\"), these fit; if smaller, you likely need 6mm (coming soon).\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon, sold individually or in 50–1000 packs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639422607407,"sku":"PRW-8MM-DIRT-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639422640175,"sku":"PRW-8MM-DIRT-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639422672943,"sku":"PRW-8MM-DIRT-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639422705711,"sku":"PRW-8MM-DIRT-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639422738479,"sku":"PRW-8MM-DIRT-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639422574639,"sku":"PRW-8MM-DIRT-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_a11a2cff-37bf-4716-95b0-eee52ce87058.jpg?v=1784498861"},{"product_id":"jet-ski-pwc-panel-push-rivets-8mm-nylon-trim-clips","title":"Jet Ski \u0026 PWC Panel Push Rivets – 8mm Nylon Trim Clips","description":"\u003cp\u003e\u003cstrong\u003e8mm push rivets for jet ski and PWC panels\u003c\/strong\u003e — the expansion clips used on hull access panels, glove box trim, and deck fittings across Sea-Doo, Yamaha WaveRunner, and Kawasaki Jet Ski models where holes measure 8mm.\u003c\/p\u003e\u003ch3\u003eCommon applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStorage compartment and access panel trim\u003c\/li\u003e\n\u003cli\u003eGlove box and console panels\u003c\/li\u003e\n\u003cli\u003eSeat base and deck mat edge trim\u003c\/li\u003e\n\u003cli\u003eEngine cover trim points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMarine note\u003c\/h3\u003e\u003cp\u003eUV-resistant nylon handles sun and spray without corroding like metal fasteners. These are trim fasteners — do not use them below the waterline or for structural hull attachment.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall — fits 8mm (5\/16\") holes\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon, sold individually or in 50–1000 packs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639422804015,"sku":"PRW-8MM-PWC-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639422836783,"sku":"PRW-8MM-PWC-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639422869551,"sku":"PRW-8MM-PWC-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639422902319,"sku":"PRW-8MM-PWC-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639422935087,"sku":"PRW-8MM-PWC-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639422771247,"sku":"PRW-8MM-PWC-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_489dbdc3-a1a0-4008-b3d5-548977a2c825.jpg?v=1784498861"},{"product_id":"enclosed-trailer-rv-panel-push-rivets-8mm-nylon-fasteners","title":"Enclosed Trailer \u0026 RV Panel Push Rivets – 8mm Nylon Fasteners","description":"\u003cp\u003e\u003cstrong\u003e8mm push rivets for enclosed trailer walls, RV interior panels, and shop paneling.\u003c\/strong\u003e The fast, tool-free way to secure luan, FRP edge trim, and plastic panels into 8mm holes.\u003c\/p\u003e\u003ch3\u003eCommon applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEnclosed cargo trailer interior wall panels\u003c\/li\u003e\n\u003cli\u003eRV and camper interior trim panels\u003c\/li\u003e\n\u003cli\u003eTruck cap and topper liner panels\u003c\/li\u003e\n\u003cli\u003eShop wall paneling and pegboard trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy push rivets beat screws here\u003c\/h3\u003e\u003cp\u003eNo stripped screw heads, no cracked luan from over-driving, and panels come off cleanly for wiring access — just pop the center pin. Fresh rivets press in by hand in seconds.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall — fits 8mm (5\/16\") holes, ~2–6mm panel stack\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon, sold individually or in 50–1000 packs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639423000623,"sku":"PRW-8MM-TRLR-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639423033391,"sku":"PRW-8MM-TRLR-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639423066159,"sku":"PRW-8MM-TRLR-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639423098927,"sku":"PRW-8MM-TRLR-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639423131695,"sku":"PRW-8MM-TRLR-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639422967855,"sku":"PRW-8MM-TRLR-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_aa6e4f9f-441d-4834-bb5a-2a4987071feb.jpg?v=1784498861"},{"product_id":"gm-21075686-replacement-push-rivets-8mm-rocker-fender-liner-clips","title":"GM 21075686 \/ 11561878 Replacement Push Rivets – 8mm Black Nylon Rocker \u0026 Fender Liner Clips, 15mm Head","description":"\u003cp\u003eAftermarket replacement for \u003cstrong\u003eGM OEM part 21075686\u003c\/strong\u003e (cross-referenced with 11561878) — the 8mm nylon push retainer GM used for decades on rocker panels, wheel liners, air inlet ducts, and cowl grilles. Identical 8mm shank, 15mm head, ~20mm length.\u003c\/p\u003e\u003ch3\u003eUsed across the GM lineup including\u003c\/h3\u003e\u003cp\u003eChevrolet Silverado \/ C-K 1500-3500, Tahoe, Suburban, Colorado, Avalanche, S-10 • GMC Sierra, Yukon, Canyon, Sonoma, Envoy, Jimmy, Savana • Cadillac Escalade • Hummer H2 • Pontiac Firebird, Grand Prix, G6, Sunfire • Saturn S-Series and L-Series • Oldsmobile Aurora, Bravada\u003c\/p\u003e\u003ch3\u003eCommon locations\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRocker panel and wheelhouse liner retainers\u003c\/li\u003e\n\u003cli\u003eAir inlet duct and cowl grille fasteners\u003c\/li\u003e\n\u003cli\u003eSplash shield and baffle retainers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank — fits 8mm (5\/16\") holes\u003c\/li\u003e\n\u003cli\u003e15mm head, black UV-resistant nylon\u003c\/li\u003e\n\u003cli\u003eReplaces GM 21075686 \/ 11561878\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639470153775,"sku":"PRW-8MM-GM-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639470186543,"sku":"PRW-8MM-GM-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639470219311,"sku":"PRW-8MM-GM-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639470252079,"sku":"PRW-8MM-GM-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639470284847,"sku":"PRW-8MM-GM-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639470121007,"sku":"PRW-8MM-GM-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_e68ffad4-894a-4caf-8294-9e8801bfb7e4.jpg?v=1784498862"},{"product_id":"ford-f3ly-14570-b-replacement-push-rivets-8mm-rocker-liner-clips","title":"Ford F3LY-14570-B Replacement Push Rivets – 8mm Black Nylon Rocker \u0026 Liner Clips, 15mm Head","description":"\u003cp\u003eAftermarket replacement for \u003cstrong\u003eFord OEM F3LY-14570-B\u003c\/strong\u003e (cross-referenced with 11561878) — the 8mm nylon push retainer used on Ford rocker panels, wheel liners, and air inlet ducts. 8mm shank, 15mm head.\u003c\/p\u003e\u003ch3\u003eCommon locations\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRocker panel moldings\u003c\/li\u003e\n\u003cli\u003eWheel liner and splash shield retainers\u003c\/li\u003e\n\u003cli\u003eAir inlet duct fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant — measure first\u003c\/h3\u003e\u003cp\u003eFord used many clip styles across its lineup. These fit \u003cstrong\u003e8mm (5\/16\") holes with ~2–6mm panel stack\u003c\/strong\u003e. Pop out one old clip and gauge the hole with a 5\/16\" drill bit before ordering.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003cli\u003eReplaces Ford F3LY-14570-B \/ 11561878\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639470350383,"sku":"PRW-8MM-FORD-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639470383151,"sku":"PRW-8MM-FORD-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639470415919,"sku":"PRW-8MM-FORD-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639470448687,"sku":"PRW-8MM-FORD-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639470481455,"sku":"PRW-8MM-FORD-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639470317615,"sku":"PRW-8MM-FORD-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_3d0188ea-2b01-405c-bda8-5f85cc8dcfb5.jpg?v=1784498862"},{"product_id":"nissan-01553-09321-compatible-push-rivets-8mm-bumper-liner-clips","title":"Nissan 01553-09321 Compatible Push Rivets – 8mm Black Nylon Bumper \u0026 Fender Liner Clips, 15mm Head","description":"\u003cp\u003eCompatible replacement for \u003cstrong\u003eNissan \/ Infiniti OEM 01553-09321\u003c\/strong\u003e (also cross-referenced with Mitsubishi MR328954) — the 8mm push clip used on nearly every Nissan and Infiniti from the 1990s through the late 2010s for bumpers, fender liners, radiator supports, and splash shields.\u003c\/p\u003e\u003ch3\u003eUsed on\u003c\/h3\u003e\u003cp\u003eAltima, Maxima, Sentra, Versa, Frontier, Titan, Pathfinder, Armada, Murano, Rogue, Xterra, 350Z, 370Z, GT-R, Juke, Quest, Cube • Infiniti FX, G, M, Q series\u003c\/p\u003e\u003ch3\u003eFitment note — read before ordering\u003c\/h3\u003e\u003cp\u003eThese fit the same \u003cstrong\u003e8mm hole\u003c\/strong\u003e as the OEM clip. The factory Nissan clip has a 20mm head; ours is \u003cstrong\u003e15mm\u003c\/strong\u003e — it holds the same panels securely with a slightly smaller footprint. If you need the exact wide-head look on a visible exterior panel, the OEM clip may suit better; for liners, shields, and hidden fasteners these are a direct working replacement at a fraction of dealer price.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639470546991,"sku":"PRW-8MM-NIS-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639470579759,"sku":"PRW-8MM-NIS-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639470612527,"sku":"PRW-8MM-NIS-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639470645295,"sku":"PRW-8MM-NIS-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639470678063,"sku":"PRW-8MM-NIS-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639470514223,"sku":"PRW-8MM-NIS-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_78fb8316-0c7d-499f-8f74-681b1f390ba1.jpg?v=1784498862"},{"product_id":"sea-doo-brp-293150089-replacement-push-rivets-8mm-panel-clips","title":"Sea-Doo \/ BRP 293150089 Replacement Push Rivets – 8mm Black Nylon Panel Clips, 15mm Head, 21mm Long","description":"\u003cp\u003eDirect replacement for \u003cstrong\u003eBRP \/ Sea-Doo OEM 293150089\u003c\/strong\u003e — the same 8mm plastic rivet BRP uses across Sea-Doo watercraft, Can-Am off-road, and Ski-Doo snowmobiles. One BRP part number, three vehicle families.\u003c\/p\u003e\u003ch3\u003eUsed on\u003c\/h3\u003e\u003cp\u003eSea-Doo Spark, GTI, GTX, RXP-X, RXT-X trim and access panels • Ski-Doo hood and side panels • Can-Am Outlander, Maverick, Defender body panels\u003c\/p\u003e\u003ch3\u003eMarine note\u003c\/h3\u003e\u003cp\u003eUV-resistant nylon shrugs off sun and spray without corroding. Trim fastener only — not for below-waterline or structural hull use.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8mm shank, 15mm head, 21mm overall — fits 8mm (5\/16\") holes\u003c\/li\u003e\n\u003cli\u003eBlack UV-resistant nylon\u003c\/li\u003e\n\u003cli\u003eReplaces BRP 293150089\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold individually or in 50–1000 packs.\u003c\/p\u003e\n\u003ch3\u003eFit check and install\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMeasure the panel hole: these rivets fit an \u003cstrong\u003e8mm (5\/16\")\u003c\/strong\u003e hole. A hole of a different size needs a different rivet.\u003c\/li\u003e\n\u003cli\u003eTo remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.\u003c\/li\u003e\n\u003cli\u003eTo fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.\u003c\/li\u003e\n\u003cli\u003eUse a new rivet each time: removal deforms the legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePack sizes:\u003c\/strong\u003e 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.\u003c\/p\u003e","brand":"Push Rivet Warehouse","offers":[{"title":"50 Pack","offer_id":45639470743599,"sku":"PRW-8MM-SEA-50","price":7.99,"currency_code":"USD","in_stock":true},{"title":"100 Pack","offer_id":45639470776367,"sku":"PRW-8MM-SEA-100","price":10.99,"currency_code":"USD","in_stock":true},{"title":"250 Pack","offer_id":45639470809135,"sku":"PRW-8MM-SEA-250","price":17.99,"currency_code":"USD","in_stock":true},{"title":"500 Pack","offer_id":45639470841903,"sku":"PRW-8MM-SEA-500","price":27.99,"currency_code":"USD","in_stock":true},{"title":"1000 Pack","offer_id":45639470874671,"sku":"PRW-8MM-SEA-1000","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Single Rivet","offer_id":45639470710831,"sku":"PRW-8MM-SEA-1","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/3890\/9487\/files\/Push_Rivet_7353fd67-189d-41a1-ae6c-440476249f9b.jpg?v=1784498862"}],"url":"https:\/\/pushrivetwarehouse.com\/collections\/8mm-push-rivets.oembed","provider":"PushRivetWarehouse","version":"1.0","type":"link"}