Replacing broken clips on your Infiniti? Our Nissan 01553-09321 compatible push rivets fit the 8mm push clip used on nearly every Nissan and Infiniti from the 1990s through the late 2010s: bumpers, fender liners, radiator supports and splash shields.
Where the Infiniti uses 8mm push rivets
- Bumpers
- Fender liners
- Radiator supports
- Splash shields
Infiniti models named on our listing: FX, G, M and Q series.
Head size note: these fit the same 8mm hole as the OEM clip. The factory Nissan clip has a 20mm head; ours is 15mm. For liners, shields and hidden fasteners they are a direct working replacement. If you need the exact wide-head look on a visible exterior panel, the OEM clip may suit better.
Check the fit before you order
- Pop out one old clip and measure the hole. A 5/16" drill bit that just slips through confirms 8mm. If the hole is 9mm or 10mm, these are not your clip.
- Check the panel stack: these fit 8mm holes with roughly 2–6mm of panel stack-up.
- To remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.
- Line up the panel and frame holes and push the new rivet in until the head sits flat; the legs expand behind the panel. Use a new rivet each time: removal deforms the legs.
More help: push rivet size guide · how many do I need? · how to remove push rivets
Specs
- 8mm shank, fits 8mm (5/16") holes
- 15mm head
- Black UV-resistant nylon
- Sold individually or in 50, 100, 250, 500 and 1,000 packs
- Ships from South Carolina in 1–2 business days (USPS with tracking)
Shop 01553-09321 compatible push rivets: singles to 1,000-packs →
Pick your model and year
Each year page shows where that vehicle uses 8mm push rivets and has its own buy box.
Other makes: Nissan · Chevrolet · Ford · car & truck clips
FAQ
Which Infiniti part do these replace?
They are a compatible replacement for Nissan / Infiniti OEM 01553-09321 (also cross-referenced with Mitsubishi MR328954), the 8mm push clip used on bumpers, fender liners, radiator supports and splash shields. See the 01553-09321 listing.
Which Infiniti models use it?
Our listing names the Infiniti FX, G, M and Q series, from the 1990s through the late 2010s. Measure one hole first.
Is the head the same size as OEM?
No. The factory clip has a 20mm head; ours is 15mm and fits the same 8mm hole.
Can I reuse the old clips?
No. Removal deforms the legs, so fit a new rivet each time.