Nissan 01553-09321 Compatible Push Rivets – 8mm Black Nylon Bumper & Fender Liner Clips, 15mm Head
Nissan 01553-09321 Compatible Push Rivets – 8mm Black Nylon Bumper & Fender Liner Clips, 15mm Head
In stock Ships in 1–2 business days 14-day returns
Ordering several packs? Quantities in the Bulk Discounts table count packs of the size you pick below, not rivets. The discount applies automatically in the cart. Buying single rivets? Quantities in the Bulk Discounts table below count single rivets. The discount applies automatically in the cart.
Bulk Discounts
| Quantity | Price per unit |
|---|---|
| Buy 1 – 49 | $42.99 /each |
| Buy 50 – 499 | $38.69 /each |
| Buy 500 – 999 | $34.39 /each |
| Buy 1000 – 2499 | $30.09 /each |
| Buy 2500 – 4999 | $25.79 /each |
| Buy 5000 + | $21.50 /each |
1000 rivets for $42.99 · $0.043 each · save 82% vs singles
Fits 8 mm (5/16″) holes · 15 mm head · Used on Nissan, Infiniti
Not sure? A 5/16″ drill bit that just slips through the hole confirms 8 mm. Check your vehicle
- Ships in 1–2 business days from South Carolina
- USPS with tracking · typically 2–5 days after shipment
- Black UV-resistant nylon
- 14-day returns on unopened packs · wrong or damaged item replaced free (report within 7 days)
Product details
Compatible replacement for Nissan / Infiniti OEM 01553-09321 (also cross-referenced with Mitsubishi MR328954) — the 8mm push clip used on nearly every Nissan and Infiniti from the 1990s through the late 2010s for bumpers, fender liners, radiator supports, and splash shields.
Used on
Altima, Maxima, Sentra, Versa, Frontier, Titan, Pathfinder, Armada, Murano, Rogue, Xterra, 350Z, 370Z, GT-R, Juke, Quest, Cube • Infiniti FX, G, M, Q series
Fitment note — read before ordering
These fit the same 8mm hole as the OEM clip. The factory Nissan clip has a 20mm head; ours is 15mm — it holds the same panels securely with a slightly smaller footprint. If you need the exact wide-head look on a visible exterior panel, the OEM clip may suit better; for liners, shields, and hidden fasteners these are a direct working replacement at a fraction of dealer price.
Specs
- 8mm shank, 15mm head, 21mm overall
- Black UV-resistant nylon
Sold individually or in 50–1000 packs.
Fit check and install
- Measure the panel hole: these rivets fit an 8mm (5/16") hole. A hole of a different size needs a different rivet.
- To remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.
- To fit a new one, line up the panel and frame holes and push the rivet in until the head sits flat; the legs expand behind the panel to hold it.
- Use a new rivet each time: removal deforms the legs.
Pack sizes: 50 Pack, 100 Pack, 250 Pack, 500 Pack, 1000 Pack, Single Rivet.
What’s in the pack
50, 100, 250, 500 or 1,000 identical push rivets per pack, or a single rivet.
- 8mm shank, 15mm head, 21mm overall
- Black UV-resistant nylon
- 50 Pack One full ATV plastic refresh (30–40 rivets) $7.99 $0.16/rivet · save 36%
- 100 Pack A UTV refresh with doors & bed (40–60), or two ATVs $10.99 $0.11/rivet · save 56%
- 250 Pack Up to five ATV refreshes $17.99 $0.072/rivet · save 71%
- 500 Pack Five or more UTVs, or a small fleet $27.99 $0.056/rivet · save 77%
- 1000 Pack Best value Shops: keep one on the shelf $42.99 $0.043/rivet · save 82%
- 1 rivet A clip or two (single orders are final sale) $0.25 $0.25/rivet
Rivet counts come from our quantity calculator and include about 15% spares.
How to install
-
Measure the hole
Pop out one old clip and measure the panel hole, not the old rivet. A 5/16″ drill bit that just slips through confirms 8 mm.
-
Line up the panel
These hold a combined panel stack of roughly 2–6 mm.
-
Press in a fresh rivet
Fresh rivets press in by hand in seconds. Don’t reuse old ones: removal deforms the legs.
Machines named in this listing
| Make | Models |
|---|---|
| Nissan | Altima, Maxima, Sentra, Versa, Frontier, Titan, Pathfinder, Armada, Murano, Rogue, Xterra, 350Z, 370Z, GT-R, Juke, Quest, Cube |
| Infiniti | FX, G, M, Q series |
Any 8 mm (5/16″) hole takes this rivet. Not listed? Check your machine.
How many rivets do I need?
Pick a job from our quantity calculator, or type your own count. We find the cheapest mix of packs at today’s list prices (any bulk-tier discount is applied later, in the cart).
Will These Fit My Machine?
Type your year, make, and model to check fitment instantly.
Vehicle fitment guides
Vehicle guides that point to this listing. Each has its own details and a buy box.
- Nissan Altima1995–2015
- Nissan Rogue2008–2018
- Nissan Juke2011–2017
- Nissan Sentra2000–2012
- Infiniti G352003–2008
- Nissan Pathfinder1996–2018
- Nissan Frontier1998–2018
- Nissan Murano2003–2018
- Nissan Maxima1995–2014
- Nissan Xterra2000–2015
- Nissan Versa2007–2012
- Nissan Titan2004–2018
229 vehicle guides in all. Every machine A–Z · Fitment lookup
Replaces These OEM Part Numbers
Direct aftermarket replacement for the following factory fasteners.
| Manufacturer | OEM Part Number |
|---|---|
| Nissan | 01553-09321 |
Specifications
| Shank Diameter | 8mm (fits 8mm / 5/16" holes) |
|---|---|
| Head Diameter | 15mm |
| Overall Length | 21mm |
| Material | Black UV-resistant nylon |
| Style | Push-in expansion rivet |
| Reusable | No — replace after removal |
Questions before you buy
Do I need a removal tool?
No special tool is needed. To take a panel off, pop the center pin and the rivet comes out. Fresh rivets press in by hand in seconds.
Are push rivets reusable?
No. Removal deforms the legs, so always install a fresh rivet.
What hole size do these fit?
8 mm (5/16″) holes, with a combined panel stack of roughly 2–6 mm. The head is 15 mm. A 5/16″ drill bit that just slips through the hole confirms 8 mm; if your hole is 9 mm or 10 mm, these are not your clip.
How many rivets do I need?
A single fender flare takes 4–8, a pair of side panels 6–8, a full ATV plastic refresh 30–40 and a full UTV refresh with doors and bed 40–60. Add about 15% spares for breakage and drops. Quantity calculator
How fast do you ship?
Orders ship in 1–2 business days from South Carolina by USPS with tracking, typically arriving 2–5 days after shipment. Shipping policy
Can I return them?
Unopened packs can be returned within 14 days of delivery with prior authorization (contact us with your order number first). Authorized returns carry a 20% restocking fee and the buyer pays return shipping. Opened packs and single-rivet orders are final sale. If we ship the wrong item or it arrives damaged, send a photo within 7 days and we replace it at no cost. Refund policy
Is the head the same size as the factory clip?
The factory Nissan clip has a 20 mm head; ours is 15 mm. It holds the same panels in the same 8 mm hole. For liners, shields and hidden fasteners it is a direct working replacement; on a visible exterior panel where you want the wide-head look, the OEM clip may suit better.