8mm Push Rivets for Jeep – Fender Liner & Bumper Clips

Universal 8 mm push rivet; check your hole size

  • Fits 8 mm (5/16″) holes
  • Measure a panel hole before ordering
8mm Automotive Fender Liner & Bumper Clips – Nylon Push Rivets
Choose a pack

100 rivets for $10.99 · $0.11 each · save 56%

Full product details

Looking for fender liner or bumper clips for your Jeep with 8mm (5/16") holes? Our 8mm automotive push rivets are a universal expansion-rivet style for fender liners, splash shields and bumper covers where the panel hole measures 8mm.

Honest fit note: we don't list a Jeep OEM part number for these rivets, and automotive clip sizes vary by make, model and even panel position. They fit your Jeep only where the hole is 8mm. Check one hole before you order.

Typical places 8mm push rivets are used

  • Inner fender liners and wheel well splash shields
  • Bumper cover edges and lower valances
  • Engine splash guards and underbody panels
  • Trunk and cargo area trim panels

Check the fit before you order

  1. Pop out one old clip and measure the hole. A 5/16" drill bit that just slips through confirms 8mm. If the hole is 9mm or 10mm, these are not your clip.
  2. Check the panel stack: these fit 8mm holes with roughly 2–6mm of panel stack-up.
  3. To remove an old rivet, work a trim-clip tool or forked pry tool under the head and lift it straight out.
  4. Line up the panel and frame holes and push the new rivet in until the head sits flat; the legs expand behind the panel. Use a new rivet each time: removal deforms the legs.

More help: push rivet size guide · how many do I need? · how to remove push rivets

Specs

  • 8mm shank, fits 8mm (5/16") holes
  • 15mm head
  • Black UV-resistant nylon
  • Sold individually or in 50, 100, 250, 500 and 1,000 packs
  • Ships from South Carolina in 1–2 business days (USPS with tracking)

Shop 8mm automotive push rivets: singles to 1,000-packs →

Makes with an OEM cross-reference on our listings: Chevrolet · GMC · Ford · Nissan · Infiniti · car & truck clips

FAQ

Do these fit my Jeep?

Only if the clip hole measures 8mm (5/16") and the panel stack is about 2–6mm. We don't list a Jeep OEM part number for these rivets, so measure an old clip before ordering.

What if my hole is 9mm or 10mm?

Then these are not your clip. We stock 8mm only.

Can I reuse the old clips?

No. Removal deforms the legs, so fit a new rivet each time.